Filter
Top Products
186
snmp-server engineID
Description
The snmp-server engineID command is used to configure the local and remote
engineID of the switch. To restore to the default setting, please use no
snmp-server engineID command.
Syntax
snmp-server engineID { [ local local-engineID ] [ remote remote-engineID ] }
no snmp-server engineID
Parameter
local-engineID —— Local Engine ID for local clients. The Engine ID is a unique
alphanumeric string used to identify the SNMP engine on the switch. Its length
ranges from 10 to 64 hexadecimal characters, which must be even number
meanwhile.
remote-engineID —— Remote Engine ID for the switch. The Engine ID is a
unique alphanumeric string used to identify the SNMP engine on the remote
device which receives informs from the switch. Its length ranges from 10 to 64
hexadecimal characters, which must be even number meanwhile. The
snmp-server engineID will be disabled if the local and remote are both not
configured.
Command Mode
Global Configuration Mode
Example
Specify the local engineID as 1234567890, and the remote engineID as
abcdef123456:
TL-SG3424(config)# snmp-server engineID local 1234567890 remote
abcdef123456
rmon history
Description
The rmon history command is used to configure the history sample entry. To
return to the default configuration, please use no rmon history command.
RMON (Remote Monitoring), basing on SNMP architecture, functions to monitor
the network. History Group is one of the commonly used RMON Groups. After a
history group is configured, the switch collects network statistics information