Filter
Top Products
07
Gigabit Uplink Web Smart Switch
Keep the device far from high-frequency, strong-current devices, such as radio
transmitting station.
Use electromagnetic shielding when necessary.
Lightening Protection
13
57
2468GIGA SFP
10/100Mbps
10/100/1000Mbps
1000Mbps
12345678
TL-SL2210WEB
RESET
8+2GWeb-SmartSwitch
Power
100M
Link
Act
System
1000M
GIGA
Link/Act
Link/Act
R
Extremely high voltage currents can be produced instantly when lightning occurs and the air
in the electric discharge path can be instantly heated up to
20,000℃
. As this instant current
is strong enough to damage electronic devices, more effective lightning protection measures
should be taken.
Ensure the rack and device are well earthed.
Make sure the power socket has a good contact with the ground.
Keep a reasonable cabling system and avoid induced lightning.
Use the signal SPD (Surge Protective Device) when wiring outdoor.
Note: For detailed lightning protection measures, please refer to Chapter 3
Lightning Protection.
Installation Site
S
13
57
2468GIGA SFP
10/100Mbps
10/100/1000Mbps
1000Mbps
12345678
TL-SL2210WEB
RESET
8+2GWeb-SmartSwitch
Power
100M
Link
Act
System
1000M
GIGA
Link/Act
Link/Act
R
When installing the device on a rack or a flat workbench, please note the following
items:
The rack or workbench is flat and stable, and sturdy enough to support the weight
of 5.5kg at least.
The rack or workbench has a good ventilation system. The equipment room is well
ventilated.
The rack is well grounded. Keep the power socket less than 1.5 meters away from
the device.
Installation