15
Gigabit Uplink Web Smart Switch
System setting contains the following topics: displaying and configuring the switch
information, upgrading firmware, backing up and loading configuration, rebooting and
soft-resetting, configuring username and password.
The system information contains hardware version, software version, system
description, system name, system location, contact information and run time.
TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TLSL2452WEB Gigabit Uplink Web Smart
Switch is equipped with the function of configuration backup, configuration loading
and system upgrading. The configuration file and executive file are transferred in TFTP
protocol. TFTP (Trivial File Transfer Protocol) is dedicated to transferring files between
two network stations. It’s based on UDP protocol.
The “Reset” indicates “Soft-reset” here. Soft-resetting restores the switch configuration
to default except the IP address of the switch.
The username and password can be modified in order to exclude illegal users.
Ports have the duplex modes: 10Mbps HD, 10Mbps FD, 100Mbps HD, 100Mbps FD and
1000Mbps FD (Giga port support). The First part indicates the transmission rate and
the second part indicates the duplex mode.
Fuction Description