TP-Link TL-SL3428 Switch User Manual


 
Th
e following entries are displayed on this screen:
Search Option
Source: Select a Source from the pull-down list and click the Search
button to view your desired entry in the Binding Table.
All: All the bound entries will be displayed.
Manual: Only the manually added entries will be
displayed.
Scanning: Only the entries formed via ARP Scanning will
be displayed.
Snooping: Only the entries formed via DHCP Snooping
will be displayed.
Binding Table
IP Select: Click the Select button to quick-select the corresponding entry
based on the IP address you entered.
Select: Select the desired entry to modify the Host Name and Protect
Type. It is multi-optional.
Host Name: Displays the Host Name here.
IP Address: Displays the IP address of the Host.
MAC Address: Displays the MAC address of the Host.
VLAN ID: Displays the VLAN ID here.
Port: Displays the number of port connected to the Host.
Protect Type: Allows you to view and modify the Protect Type of the entry.
Source: Displays the Source of the entry.
Collision: Displays the Collision status of the entry.
Warning: Indicates that the collision may be caused by the
MSTP function.
Critical: Indicates that the entry has a collision with the
other entries.
Note:
1. Among the entries with Critical collision level, the one with the highest Source priority will take
effect.
2. Among the conflicting entries with the same Source priority, only the last added or edited one
will take effect.
11.1.2 Manual Binding
You can manually bind the IP address, MAC address, VLAN ID and the Port number together in
the condition that you have got the related information of the Hosts in the LAN.
Choose the menu Network SecurityIP-MAC BindingManual Binding to load the following
page.
142