Filter
Top Products
Step Operation Description
2 Create VLAN10 ge, create a Required. On VLAN→802.1Q VLAN→VLAN Config pa
VLAN with its VLAN ID as 10, owning Port 2 and Port 3.
3 Create VLAN20 e, create a
VLAN with its VLAN ID as 20, owning Port 3 and Port 4.
Required. On VLAN→802.1Q VLAN→VLAN Config pag
Confi B gure Switch
S tep Operation Description
1
ype of the and Port 8 as ACCESS, TRUNK and
Configure the
Link T
ports
Required. On VLAN→802.1Q VLAN→Port Config page, configure
the link type of Port 7, Port 6
ACCESS respectively.
2 Create VLAN10 ge, create a Required. On VLAN→802.1Q VLAN→VLAN Config pa
VLAN with its VLAN ID as 10, owning Port 6 and Port 8.
3 Create VLAN20 ge, create a Required. On VLAN→802.1Q VLAN→VLAN Config pa
VLAN with its VLAN ID as 20, owning Port 6 and Port 7.
6.5 Application Example for Protocol VLAN
via Port12 of Switch A;
host is served by AppleTalk server;
server and AppleTalk server.
Network Diagram
Network Requirements
Department A is connected to the company LAN
Department A has IP host and AppleTalk host;
IP host, in VLAN10, is served by IP server while AppleTalk
Switch B is connected to IP
69