TP-Link TL-SL3428 Switch User Manual


 
Figure 6-9 Enable Protocol VLAN for Port
Port Enable: Select your desired port for Protocol VLAN feature. All the ports are
disabled by default.
Configuration Procedure:
Step Operation Description
1 Set the link type for port. Required. On the VLAN802.1Q VLANPort Config
page, set the link type for the port basing on its connected
device.
2 Create VLAN. Required. On the VLAN802.1Q VLANVLAN Config
page, click the Create button to create a VLAN. Enter the
VLAN ID and the description for the VLAN. Meanwhile,
specify its member ports.
3 Create Protocol Template. Required. On the VLANProtocol VLANProtocol
Template page, create the Protocol Template before
configuring Protocol VLAN.
4 Select your desired ports for
Protocol VLAN feature.
Required. On the VLANProtocol VLANPort Enable
page, select and enable the desired ports for Protocol
VLAN feature.
5 Create Protocol VLAN. Required. On the VLANProtocol VLANProtocol
VLAN page, select the protocol type and enter the VLAN ID
to create a Protocol VLAN.
6 Modify/View VLAN. Optional. On the VLANProtocol VLANProtocol VLAN
page, click the Edit button to modify/view the information of
the corresponding VLAN.
7 Delete VLAN. Optional. On the VLANProtocol VLANProtocol VLAN
page, select the desired entry to delete the corresponding
VLAN by clicking the Delete button.
6.3 GVRP
GVRP (GARP VLAN Registration Protocol) is an implementation of GARP (generic attribute
registration protocol). GVRP allows the switch to automatically add or remove the VLANs via the
dynamic VLAN registration information and propagate the local VLAN registration information to
other switches, without having to individually configure each VLAN.
64