TP-Link TL-SL3428 Switch User Manual


 
Note:
1. The system time will be restored to the default when the switch is restarted and you need to
reconfigure the system time of the switch.
2. When Get Time from NTP Server is selected and no time server is configured, the switch will
get time from the time server of the Internet if it has connected to the Internet.
Choose the
menu SystemSystem InfoDaylight Saving Time to load the following page.
4.1.4 Daylight Saving Time
Here you can configure the Daylight Saving Time of the switch.
Figure 4-6 Daylight Saving Time
es are displayed on this screen:
Predefined Mode:
configuration:
:00.
Recurring Mode:
use:
Start/End Time: Select starting time and ending time of
Daylight Saving Time.
The following entri
DST Config
DST Status: Enable or Disable DST.
Select a predefined DST
USA: Second Sunday in March, 02:00 ~ First Sunday in
November, 02
Australia: First Sunday in October, 02:00 ~ First Sunday in
April, 03:00.
Europe: Last Sunday in March, 01:00 ~ Last Sunday in
October, 01:00.
New Zealand: Last Sunday in September, 02:00 ~ First
Sunday in April, 03:00.
Specify the DST configuration in recurring mode. This
configuration is recurring in
Offset: Specify the time adding in minutes when Daylight
Saving Time comes.
15