Filter
Top Products
3.
If the Protocol VLAN is created, please set its enabled port to be the member of
corresponding 802.1Q VLAN so as to ensure the packets forwarded normally.
6.2.1 Protocol VLAN
On this page, you can create Protocol VLAN and view the information of the current defined
Protocol VLANs.
Choose the menu VLAN→Protocol VLAN→Protocol VLAN to load the following page.
Figure 6-7 Create Protocol VLAN
The following entries are displayed on this screen:
Create Protocol VLAN
Protocol: Select the defined protocol template.
VLAN ID: Enter the ID number of the Protocol VLAN. This VLAN should be one
of the 802.1Q VLANs the ingress port belongs to.
Protocol VLAN Table
Select: Select the desired entry. It is multi-optional.
Protocol: Displays the protocol template of the VLAN.
Ether Type: Displays the Ethernet protocol type field in the protocol template.
VLAN ID: Displays the corresponding VLAN ID of the protocol.
Operation: Click the Edit button to modify the settings of the entry. And click the
Modify button to apply your settings.
6.2.2 Protocol Template
The Protocol Template should be created before configuring the Protocol VLAN. By default, the
switch has defined the IP Template, ARP Template, RARP Template, etc. You can add more
Protocol Template on this page.
Choose the menu VLAN→Protocol VLAN→Protocol Template to load the following page.
62