Filter
Top Products
TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide
9
Figure 1-12 Connecting to the Switch
2. You are prompted to enter the connection password 123 you have set through Console port
connection, and then you are in User EXEC Mode.
Figure 1-13 Enter into the User EXEC Mode
3. When entering enable command to access Privileged EXEC Mode, you are required to give
the password 123 you have set through Console port connection.
Figure 1-14 Enter into the Privileged EXEC Mode
Now you can manage your switch with CLI commands through Telnet connection.
Note:
You can refer to Chapter 11 User Manage Commands
for detailed commands information of the
Telnet connection configuration.