Filter
Top Products
TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide
74
Parameter
auth-pri ip —— The IP address of the authentication server.
auth-sec ip —— The IP address of the alternative authentication server.
auth-port port ——The UDP port of authentication server(s) ranging from 1 to
65535. The default value is 1812.
auth-key keyvalue ——The shared password for the switch and the
authentication servers to exchange messages which contains 15 characters at
most.
acct-pri ip —— The IP address of the accounting server.
acct-sec ip —— The IP address of the alternative accounting server.
acct-port port —— The UDP port of accounting server(s) ranging from 1 to
65535. The default value is 1813.
acct-key keyvalue —— The shared password for the switch and the accounting
servers to exchange messages which contains 15 characters at most.
timeout value —— The maximum time for the switch to wait for the response
before resending a request to the supplicant., ranging from 1 to 9 in second. By
default, it is 3.
Command Mode
Global Configuration Mode
Example
Configure the IP address of the accounting server as 10.20.1.100 and password
as tplink:
TL-SL3428(config)#radius auth-pri 10.20.1.100 auth-key tplink
radius server-account
Description
The radius server-account command is used to enable the accounting feature.
To disable the accounting feature, please use no radius server-account
command.
Syntax
radius server-account
no radius server-account