Filter
Top Products
TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide
209
Syntax
lldp transmit
no lldp transmit
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Example
Enable Fast Ethernet port 1 to transmit LLDPDU:
TL-SL3428(config)# interface fastEthernet 1/0/1
TL-SL3428(config-if)#lldp transmit
lldp snmp-trap
Description
The lldp snmp-trap command is used to enable the port’s SNMP notification. If
enabled, the port will notify the trap event to network management system. To
disable the ports' SNMP notification, please use no lldp snmp-trap command.
Syntax
lldp snmp-trap
no lldp snmp-trap
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Example
Enable the SNMP notification for Fast Ethernet port 1:
TL-SL3428(config)#interface fastEthernet 1/0/1
TL-SL3428(config-if)#lldp snmp-trap
lldp tlv-select
Description
The lldp tlv-select command is used to configure TLVs to be included in