Filter
Top Products
TL-SL3428/TL-SL3452 JetStream L2 Managed Switch CLI Guide
216
collects. NTDP Hops ranges from 1 to 16. By default, it is 3.
Command Mode
Global Configuration Mode
Example
Enable NTDP function globally, and specify NTDP Hops as 5, NTDP Interval
Time as 30 minutes:
TL-SL3428(config)#cluster ntdp
TL-SL3428(config)#cluster ntdp timer interval-timer 30
TL-SL3428(config)#cluster ntdp hop 5
cluster explore
Description
The cluster explore command is used to enable the topology information
collecting function manually.
Syntax
cluster explore
Command Mode
Global Configuration Mode
Example
Enable the topology information collecting function manually:
TL-SL3428(config)#cluster explore
cluster
Description
The cluster command is used to configure cluster functions of a specified port.
To return to the default configuration, please use no cluster command.
Syntax
cluster [ndp { disable | enable }] [ntdp { disable | enable }]
no cluster
Parameter
ndp —— Enable/ Disable NDP function for the port. By default, it is enabled.
ntdp —— Enable/ Disable NTDP function for the port. By default, it is enabled.