Filter
Top Products
Command Set Summary
Trango Broadband Wireless — TrangoLINK-10 User Manual Rev. E 3.0 page 28
Command Description OFF ON Remark
tftpd [<on | off>] enable or disable TFTPD service se se
tm display current time mark se se
updateflash <mainimage |
fpgaimage> <* | current
chscksum> <* | new checksum>
get image from TFTP buffer, verify
checksum and write to flash memory at
main or FPGA image section
*: skip checksum verification
se se
updateflash systemsetting write current configuration into flash
memory at system configuration section
se se
ver displays firmware version info:
1. version number and date code
2. firmware and FPGA version code
3. firmware and FPGA image
checksum
se se