Filter
Top Products
Getting Started
Trango Broadband Wireless — TrangoLINK-10 User Manual Rev. E 3.0 page 5
Log into the MU, and the System Information page with info and status appears. The equivalent command for the CLI is
sysinfo.
This particular System Information page is for a Master Unit, which is evidenced by the model number P5830S-M in the
top left. To navigate through the various screens simply click on the underlined hyperlinks on the left hand side of the
page.
The following describes the primary features and pages of the HTTP Browser interface:
Navigation Column: The blue rectangular column on the left of all pages. The top displays the model number of
the radio to which you are connected. On the bottom of the Navigation Column is the Current Status of the radio,
including current Opmode, active channel, remote ID, and remote status. The navigation column also contains all
of the hotlinks to the other pages.
System Information Page: Shows most of the basic configuration parameters of the radio. It is the first page
shown after login.
Configuration Page: The essential parameters, such as IP address, remote unit ID, channel, and polarization, are
set here.
Advanced Setup Page: RF parameters, such as Transmit Power, are set here.
Site Survey Page: From here, in Opmode “Off,” the user can conduct a spectrum analysis.
Link Control Page: With this page you can determine which SUs are connected, and how they are performing.