Filter
Top Products
15
7 Starting up for the first time
You must charge eBook Reader before initial use and when the battery is running
low.
7.1 Charging the eBook Reader Pyrus maxi
Once you have connected your TrekStor eBook Reader Pyrus maxi via the included
micro USB cable to a computer or to a socket using a suitable power supply (e. g.
TrekStor USB-Charger e.fs), it is automatically charged. After 3 hours with USB power
adapter (5 hours over PC), the battery will be fully charged and the charging will stop
automatically to prevent overcharging.
i Note: During charging, the status LED lights up. Once charging is completed, the
status LED turns off.
i Note: The maximum battery life is reached after about 10 battery charging cycles.
Thanks to the intelligent power saving management of the eBook Reader Pyrus maxi
you will be able to read for weeks with only one battery charge. Under "Settings" you
can additionally adjust the power saving setting to your personal reading behavior.
Please note that this can affect battery life.
If the eBook Reader is turned on, the battery status is shown on the upper right
corner of the display.
7.2 Switching the eBook Reader on and off
Slide the power switch ä to the right and hold for 3 seconds. Wait a few seconds for
the home screen.
i Note: In case the eBook Reader does not turn on, it has to be charged.
i Note: When starting the unit for the first time, please choose your language, set the
date and time.
Besides the date and battery status, last called up books are displayed to the left and
the books recently transferred to the Reader are displayed to the right on the home
screen. Below you will find the menu bar, and the options to call up other titles. Via
the navigation point "L
IBRARY" you can also access your eBook collection.