Filter
Top Products
23
9.6 Settings
To adjust your Reader ideally to your reading habits, various customization options
are available under "S
ETTINGS".
9.6.1 Page refresh rate
Here you can define how often the side of an eBook shall be completely rebuilt. The
rarer the page is refreshed, the greater is the likelihood that the so called ghosting
appears on the screen of your reader.
i Note: Ghosting is a normal effect that can occur when working with digital ink
displays. If multiple pages are called up in succession without a complete refresh of the
display, it can happen that "leftovers" from the previous pages appear on the following
pages.
A Ghosting can be prevented by frequently updating the display. However, this
requires more power than a rare update. You can choose on your eBook Reader
whether it carries out a complete page refresh after each, 2, 3, 4 or after 5 pages.
9.6.2 Power save settings
Auto shutdown: Set here when your device automatically turns off completely in
order to reduce the power consumption of your reader.
The time span before the automatic shut down starts first when the reader switches
to the standby mode. If you have turned off the standby function, the time span
starts when you have pressed a button on your reader for the last time.
Your reading progress is always saved even when you turn off the device, so that you
can continue reading where you left off the last time.
Slide the eBook Reader's ä power switch to the right and hold for 3 seconds to
switch it on again. If the reader was switched off, the home screen always opens after
switching on.
Standby: In contrast to switching off, some functions continue to run in the
background in the standby mode. Set how long it should take before the standby
mode is automatically activated when no button is pressed.