Tripp Lite B004-2DUA2-K Switch User Manual


 
13
Basic Operation
Port Switching Hotkeys
Toswitchfunctionalitybetweenports,akeyboardhotkeycommandisenteredthat
determines what port is accessed and which functionality is assigned to it. This
commandstartsbypressing[ScrollLock][ScrollLock]or[Ctrl][Ctrl].[ScrollLock]
[ScrollLock]isusedbydefault.Totogglebetweenthesetwo,seeAlternate Port
Switching Hotkey Command in the Hotkey Setting Mode section of this manual.
ThetablebelowcontainsthePort Switching Hotkeys used to determine what port is
accessed and which functionality is assigned to it. Note: The table below uses the
[Scroll Lock] [Scroll Lock] preceding sequence. Simply substitute [Ctrl][Ctrl] if you decide
to change the HotkeyPrecedingSequence.
Hotkey Command Action
[ScrollLock][ScrollLock][Enter] SwitchesfocusoftheKVM, Audio and USB
fromtheportthatcurrentlyhastheKVM
focustotheportthatfollowsit.(e.g.1to2,
2to3,etc.)
[ScrollLock][ScrollLock][K][Enter] SwitchesfocusoftheKVM only from the port
that currently has the KVM focus to the port
that follows it.
[ScrollLock][ScrollLock][U][Enter] SwitchesfocusoftheUSB only from the port
that currently has the USB focus to the port
that follows it.
[ScrollLock][ScrollLock][S][Enter] SwitchesfocusoftheAudio only from the
port that currently has the Audio focus to the
port that follows it.
[ScrollLock][ScrollLock][n]*[Enter] SwitchesfocusoftheKVM, Audio and USB to
theselectedportnumber.
[ScrollLock][ScrollLock][n]*[K][Enter] SwitchesfocusoftheKVM only to the se-
lectedportnumber.
[ScrollLock][ScrollLock][n]*[U][Enter] SwitchesfocusoftheUSB only to the se-
lectedportnumber.
[ScrollLock][ScrollLock][n]*[S][Enter] SwitchesfocusoftheAudio only to the se-
lectedportnumber.
[ScrollLock][ScrollLock][n]*[K][U][Enter] SwitchesfocusoftheKVM and USB to the
selectedportnumber.
[ScrollLock][ScrollLock][n]*[K][S][Enter] SwitchesfocusoftheKVM and Audio to the
selectedportnumber.
[ScrollLock][ScrollLock][n]*[U][S][Enter] SwitchesfocusoftheUSB and Audio to the
selectedportnumber.
[ScrollLock][ScrollLock][n]*[K][S][U][Enter] SwitchesfocusoftheKVM, Audio and USB to
theselectedportnumber.
[ScrollLock][ScrollLock][A][Enter] InitiatesAuto Scan mode at the default inter-
valof5secondsperport.Pressthe[Esc]or
[Spacebar]keytoexitAuto Scan mode.
[ScrollLock][ScrollLock][A][n]*[Enter] InitiatesAuto Scan mode at the selected time
interval.Pressthe[Esc]or[Spacebar]keyto
exitAuto Scan mode.
* [n] stands for the port number of the computer that you are switching to, or the number of seconds
(from 1 to 99) that an Auto Scan remains on each port.
13-09-063-933242-EN.indd 13 9/10/2013 4:45:02 PM