Tripp Lite B004-2DUA2-K Switch User Manual


  Open as PDF
of 24
 
15
Basic Operation
List KVM Settings
ThisfunctionallowsyoutodisplayalistofthecurrentKVMsettings;Hotkeys, Keyboard
OS, Keyboard Emulation, Mouse Emulation, Mouse Port Switching, Power On Detection
and Keyboard Language.Toperformthisfunction,dothefollowing.
1. OpenupaWord,Wordpad,NotepadorExcelle
2. ActivateHotkeySetting Mode using the aforementioned command
3. Pressandreleasethe[F4]key
USB Keyboard/Mouse Reset
Intheeventthatthekeyboardandmousearenotoperatingcorrectly,aresetmaybe
needed.ToperformaUSBkeyboard/mousereset,dothefollowing.
1. Activate Hotkey Setting Mode using the aforementioned command
2. Pressandreleasethe[F5]key
Hotkey Beeper Control
Whenperformingakeyboardhotkeycommand,abeepersoundstoindicatethatthe
commandistakingplace.Thisbeepersoundcanbetoggledon/offbyperformingthe
following command.
1. Activate Hotkey Setting Mode using the aforementioned command
2. Pressandreleasethe[B]key
Disable Port Switching Hotkeys
Bydefault,Port Switching Hotkeysareavailablethatallowyoutoswitchbetweenports.
TodisablethePort Switching Hotkeysandrequirethefrontpanelpushbuttonstobeused
forswitchingfunctions,dothefollowing.
1. Activate Hotkey Setting Mode using the aforementioned command
2. Pressandreleasethe[x]keyandthenpressandreleasethe[Enter]key
Firmware Upgrade Mode
TheB004-2DUA2-KandB004-2DUA4-Krmwarecanbeupgradedasupdatesbecome
availableonTrippLite’swebsite(SeetheFirmware Upgrade section in this manual for
details).Inordertoperformarmwareupgrade,Firmware Upgrade Modemustrstbe
initiated. To initiate Firmware Upgrade Mode,dothefollowing.
1. Activate Hotkey Setting Mode using the aforementioned command
2. Keyinthetext“upgrade”
3. Pressandreleasethe[Enter]key
TheLEDsonthefrontoftheKVMashtoindicatethatFirmware Upgrade Mode has
beeninitiated.
Restore Default Settings
TorestoretheKVMtoitsfactorydefaultsettings,dothefollowing.
1. Activate Hotkey Setting Mode using the aforementioned command
2. Pressandreleasethe[R]key,andthenpressandreleasethe[Enter]key
13-09-063-933242-EN.indd 15 9/10/2013 4:45:02 PM
 previous next