Tripp Lite SU1500XLCD Power Supply User Manual


  Open as PDF
of 96
 
5
Label Icons
Features
3 DIGIT DISPLAY
The 3 digit display is designed to report a variety of UPS operating and site power related conditions.
The associated picture icons and label abbreviations help identify the information being reported.
IN
The“IN”labelindicatesthevaluereportedisanINPUTcondition(inputvoltage,inputfrequency).
OUT
The“OUT”labelindicatesthevaluereportedisanOUTPUTcondition(outputvoltage,outputfrequency).
LOAD
The“LOAD”labellightstoindicatethevaluereportedisanOUTPUTLOADcondition(loadkVA,loadkilowatts,
load percentage).
BATT
The “BATT” label lights to indicate the value reported is a battery related condition (battery charge %, battery
volts).
Hz
The“Hz”labellightstoindicatethevaluereportedinvolvesfrequency(inputfrequency,outputfrequency).
MIN
The “MIN” label lights to indicate the value reported involves minutes (estimated runtime).
RUNTIME
The “RUNTIME” label lights to indicate the value reported is the estimated runtime in minutes available at
the current load level.
KWA
This is a special symbol that will never light up fully (except momentarily when first plugged in). It’s designed
tolightupin4uniquepatternstodescribe4possiblemeasurementvalues:volts(“V”),voltamps(“VA”),
watts (“W”) and amps (“A”).
TEST
The “TEST” label lights to indicate the UPS is either running a self-test or reporting self-test results.
SET
The “SET” label lights during setup mode to indicate the current action involves setting a configuration item.
GENERAL FAULT ICON
> ON with on-screen fault or shutdown code or icon indicates a variety of UPS fault conditions.
WIRING FAULT ICON
> FLASHING indicates input power lacks ground or is not wired correctly.
SINE WAVE ICON
> ON indicates the UPS is receiving input power and is providing inverter derived AC output
> BLINKINGindicatesUPSisreceivinginputpowerandisprovidinginverterderivedACoutputthatisfrequency
independent of AC input.
BYPASS ICON
> ONindicatestheUPSisrunninginBYPASSmode.
> ON with “ECO”iconindicatestheUPSisrunninginECONOMYmode.
FAULT INDICATORS
INVERTER MODE STATUS INDICATOR
13-03-138 93-3168-EN.indd 5 3/28/2013 1:04:46 PM
 previous next