Filter
Top Products
23
http://www.TYAN.com
4. Attach a post slide mount adapter to the front end of the outer slide by securing 2
sets of hex screws and hex nuts together.
5. Attach a post slide mount adapter to the rear end by moving the inner rails to expose
the screw holes. Do the same for the other outer slide.
6. Attach the newly assembled outer slide with the post slide mount adapters to the
front and rear corners of the rack that you will use to place the system chassis by
securing only the first and last screw holes (dark-colored screws), omitting the
middle screw hole. Do the same for the other side.
Cabinet into the Rack
Slide system cabinet Πwith the inner slides previously installed into the inner rails of
the outer slides attached to the rack and press on the release latch • until the front panel
is aligned with the front edge of the rack.