Filter
Top Products
45
http://www.TYAN.com
4.3 Setting the Configuration For Linux
Press the corresponding button according to the number of times specified on the
following tables, and you will see the corresponding prompt.
NOTE: If you press the C (Cancel) button at any time to cancel the configuration, you
must go through the entry process for a particular setting again.
KEY PRESS PROMPT FUNCTION
Right arrow
Configure
Network
Upon each succeeding press of the Right arrow, the
following prompt appears, allowing you to configure
the network:
NIC Choice (default is First NIC)
Enable DHCP (default is Yes)
IP Address
Netmask
Gateway
DNS Server
Using New Setting
Press S (Select) to accept.
Down arrow
once (1)
Restart
Upon pressing the Right arrow, the following prompt
appears, allowing you to restart the system:
Restart?
Press S (Select) to restart the system.
Down arrow
twice (2)
Shut Down
Upon pressing the Right arrow, the following prompt
appears, allowing you to shutdown the system:
Shutdown?
Press S (Select) to shutdown the system.
Down arrow
three (3) times
Reset Admin
Password
Upon pressing the Right arrow, the following prompt
appears, allowing you to reset the root password:
Reset Password?
Press S (Select) to reset the password.
NOTE: The default root password is password, you
can modify it by going to
/etc/lcdscript/reset_admin_password.sh
For SuSE Linux 8.1, go to
/etc/lcdscript/passchange
Down arrow
four (4) times
Enable SSH
Access
Upon pressing the Right arrow, the following prompt
appears, allowing you to enable SSH access:
SSH Access On?
Press S (Select) to enable SSH access.