Filter
Top Products
S1857 Trinity 371
63
Settings Chart (Continued)
* Setting Option not selectable
Power Interruption
The settings are Enabled or Disabled.
Overclock Warning Message
When enabled, this option sends a warning message if the CPU is overclocked.
The settings are Enabled or Disabled.
Keyboard Wake-up Function
This option allows for system power-on via the keyboard. The settings are
Enabled or Disabled.
Mouse Wake-up Function
This option allows for system power-on via the Mouse. The settings are
Enabled or Disabled.
Onboard FDC
Set this option to Enabled to enable the floppy drive controller on the mother-
board. The settings are Auto, Enabled, or Disabled.
Setting Option Optimal Default Fail-Safe Default
Fan2 Speed N/A N/A
Onboard FDC Enabled Enabled
Onboard Serial Port 1 3F8h 3F8h
Onboard Serial Port 2 2F8h 2F8h
Serial Port 2 M ode Normal Normal
*IR Duplex Mode N/A N/A
Onboard Parallel Port 378 378
Parallel Port M ode ECP ECP
*EPP Version N/A N/A
P arallel Po rt IRQ 7 7
*Parallel Port DM A Channel 3 3
Onboard IDE Both Both
Note: The CPU fan activates after the VGA card is initalized and not when the
system boots up, therefore you may experience a 5 second delay before the
CPU fan is enabled.
BIOS