24 Port Stackable Managed Switch – User Guide Page 6
Hardware Description
The 24 Stackable Managed Switch has fixed 24-port auto-sensing Ethernet RJ-45
connectors, and one expansion slot that can support a range of optional modules. These
optional modules enable the Switch to support Gigabit copper and fibre optic circuits.
Front Panel
The Front Panel of the Switch consists of 24 auto-sensing 10/100Mbs Ethernet ports, one
optional expansion slot and a console port. The LED Indicators are also located on the front
panel of the Switch.
Figure2. The Front panel of 24 Port Stackable Managed Switch
10/100Base-TX Auto MDI/MDIX RJ-45 Ports
The 24 10/100Mbps auto-sensing ports can support 10Base-T or 100Base-TX device
connection. The auto-MDI/MDIX function enables the direct connection to another Switch or
workstation without the need to select either a straight or cross-over cable.
Expansion Slot
The Switch can support one of the following expansion modules:
• Single 100Fx SC Multimode Fibre
• Single 100Fx ST Multimode Fibre
• Single 100Fx SC Singlemode Fibre
• Dual Gigabit Multimode Sx
• Dual Gigabit Singlemode Lx
• Dual Gigabit Copper 1000BaseT
Console Port
The Switch can be fully managed using the console port connected to a PC using the
supplied RS-232 cable.
Product Number 0-1591099-x © Tyco Electronics 2005 Issue 1