Filter
Top Products
6
Copyright 2006 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Setting up the PA982
This section explains how to install and charge the battery, how to check battery sta-
tus, how to connect the PA982 to a PC, how to turn on the PA982 for the first time,
how to install a PCMCIA card, and how to calibrate the screen.
Installing the Battery
WARNING!There is a risk of fire and burns if the battery pack is handled improp-
erly. DO NOT disassemble, crush, puncture, short external contacts,
or dispose the battery pack in fire or water. DO NOT attempt to open
or service the battery pack. Dispose of used batteries according to
local recycling guidelines in your area.
A backup battery cell is embedded into your device to prevent data loss in instances
when the removable battery pack is removed or completely discharged. The backup
battery will keep the data and system setting for up to 6 hours if the main battery is
removed.
NOTE:
• To enable the internal battery cell to provide backup power supply,
charge your device with the main battery pack for at least 16 hours.
• The first time you use the PA982, you must turn on the backup battery
switch.
• The first time you use the PA982, you must activate the LCD heater
switch. When activated, LCD heater will turn on automatically when
the temperature is lower than -10°C.