Filter
Top Products
18
Copyright 2006 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
5. Tap Enable Scan.
6. To perform auto scan, Tap Tools →
Auto Scan → Start Auto- Scan
7. Choose Interval : 3 secs
8. Tap : Start
9. Laser scans every 3 seconds and barcode
is
scanned automatically.
10. Tap Tools → Auto-Scan → Stop Auto-
Scan
11. To enable the scanner outside of the test
tab,
user must enable Scan2Key.exe.
This can be done via the To Kpd tab.
12. Check the box labeled “Start Scan2Key
When Exit and tap OK at the top right. The
scanner will be enabled and scans will be
directed to the keyboard buffer.