Filter
Top Products
Chapter 1 Getting Started
9
Charging the Battery
Before using the PA982 for the first time, you need to charge it for about 16 hours.
After that, you can charge the PA982 every day to recharge the battery to full capacity.
Charge the PA982 using the synchronization power cable or the docking station.
CAUTION! Operating the PA982 for the first time without the AC adapter, and
without fully charging the backup battery may result in loss of data
stored in RAM memory.
When the main battery is removed, the backup battery retains RAM
data in memory for 6 hours; charge the battery as soon as possible to
avoid the data loss in RAM memory.
Charging the Battery using the Synchronization Power Cable
1. Connect the synchronization power cable connector to the PA982 (1).
2. Plug the AC adapter cable into the power jack on the RS232 serial
connector (2).
3. Connect the AC adapter into an electrical outlet (3).
Charging the Battery with the Docking Station
1. Plug the AC adapter cable into the power jack on the docking station, then con-
nect the AC adapter into an electrical outlet.