Filter
Top Products
Chapter 2 Advanced Settings
33
Checking the Main and Backup Battery Status
This section describes how to view the power level for both the main and backup bat-
tery. To minimize power consumption, you can define settings for the auto-off function
and the processor’s operation speed.
To check the main and backup battery status:
1. Tap Start → Settings → Control Panel →
Power:
The Power Properties screen appears.
2. The battery menu item displays the status
of the main and backup batteries.
On the screen shown here, the main battery
is good, but the backup battery charge is
very low. You should charge the backup
battery as soon as possible in this case.
NOTE: It is necessary to charge the battery
when the battery charge reaches
below 10%. If the battery does not
accept a charge, contact unitech
Technical Support.
Main battery
voltage