Verbatim Wireless Network Multimedia Hard Drive Computer Drive User Manual


 
17
6. Basic Setup
6.1 Video Setup
This is the guide for setting the video output of your MediaStation Pro.
If you can not see a picture after connecting video cable, check the following:
1. “TV “– Switch to Video Input Mode: Turn on TV, and switch to video input mode same as video connection. See TV user manual.
2. “MediaStation Pro” – Switch to Video Output Mode: Press [TV OUT] button repeatedly. Whenever you press [TV OUT], video output signal is changed.
TV Video Input Mode MEDIASTATION PRO Video Output Mode Connection on TV, MEDIASTATION Pro Video Cable Type
Normal Video
“TV Output” = Composite Mode
“Composite Mode” = C/S-Video
CVBS or Composite
(Generally Yellow)
Yellow RCA Cable
(Supplied)
S-Video S-Video
S-Video Cable
* Black rounded
Component 480i
“TV Output” = Composite Mode
”Composite Mode” = C/YPbPr
Component 3
* Y(Green), Pb(Blue), Pr(Red)
Component Cable
* Y(Green), Pb(Blue), Pr(Red)
Component
480p
720p
1080p
”TV Output” = Component Mode
”Component Mode” = Select one among
480p, 720p, and 1080i same as TV input
mode
HDMI
480p
720p
1080i
1080p
640x480
800x600
1024x768
1280x1024
1600x1200
”TV Output” = HD-DVI Mode
”HD-HDMI Mode” = Select one among
480p, 720p, 1080i, 1080p, 640x480,
800x600, 1024x768, and 1280x1024,
1600x1200 same as TV input mode
HDMI HDMI Cable
NTSC, PAL : Standard of TV Output. Select a proper one for using in your country. (European standard is PAL)
① Turn on MediaStation Pro and press [SETUP] on Mode Selection screen.
① Turn on MediaStation Pro and press [SETUP] on Mode Selection screen.
② Move to ‘Video Out’ icon and press [OK]. Setup box will be displayed under icon menu.
③ Select a TV Out Mode and each detailed video output mode according to the selected
TV Out, and then press [OK].
④ Finally, press [SETUP] again for saving configurations.
② Move to ‘Audio Out’ icon and press [OK]. Setup box will be displayed under icon menu.
③ Select Audio Out Mode from Stereo or Encoded Digital, and then press [OK].
④ Finally, press [SETUP] again for saving configuration.
6.2 Audio Setup
This is the guide for setting the audio output of MediaStation Pro. You can use Stereo or Digital 5.1 ch.
Analogue/DCPM: Select when you connect the supplied audio cables (Red / White) to TV or Audio set directly.
Encoded Digital: Select when you want to listen through 5.1Ch / DTS Dolby by connecting receiver (or amplifier) with an Optical or Coaxial cable.
Setup Procedure
Setup Procedure