Filter
Top Products
13
Omni 3300 Installation Guide
To lock the connector into the power port,
align the plastic lock tab so it points up. Insert
the connector, then twist it as indicated by the
“arrow” icon above the port (“arrow” and
“lock” icons shown at right).
To unlock the connector, twist it to the right,
toward the “unlocked” icon (shown at right).
2. Plug in the power pack.
Warning: Do not plug the power pack into an outdoor outlet or
operate the terminal outdoors. Also, disconnecting power
during a transaction may cause data files stored in terminal
memory to be lost.
Note: To protect against possible damage caused by lightning
strikes and electrical surges, you may want to install a power
surge protector.
When the terminal has power, the display screen lights and the
green LED indicator flashes on and off (if the printer has no
paper).
Step 6: Install a Paper Roll in the Printer
The internal printer uses single-ply, thermal-sensitive paper 58
millimeters (2.25 inches) wide and 25 - 33 meters (82 - 108.26
feet) long.
Caution: Because impact, friction, temperature, humidity,
light, and oil affect the color and storage characteristics of
thermal paper, handle it carefully. Never load a roll of paper
with folds, wrinkles, tears, or holes at the edges or in the
printing area. For best results, cut a straight edge on the paper
with scissors before feeding it into the printer.
O3300 InstallGuide.book Page 13 Thursday, November 25, 1999 3:48 PM