Filter
Top Products
19
Omni 3300 Installation Guide
Figure 10 Optional “PIN Pad” port devices
Connect a CR 600 Check Reader
Caution: Check readers require a separate power source.
Before connecting a check reader or similar device, turn the
terminal’s power off (the LED is off).
1. If the cable is not already connected to the check reader,
insert the small modular plug on one end of the cable into
the check reader’s modular jack (Figure 11, page 20).
O3300 InstallGuide.book Page 19 Thursday, November 25, 1999 3:48 PM