Filter
Top Products
Omni 3300 Installation Guide
20
2. Insert the larger RJ45-type connector on the other end of
the cable into the “RS232” serial port on the terminal’s
back panel.
Figure 11 CR 600 Check Reader Connection
3. Turn on power to the terminal, then connect the check
reader to a power source.
Clean the Terminal and Printer
Terminal
For dirt, use a clean cloth dampened with water and mild soap.
For stubborn stains, use alcohol or an alcohol-based cleaner.
Caution: Never use thinner, trichloroethylene, or ketone-
based solvents — they may deteriorate plastic or rubber parts.
Do not spray cleaners or other solutions directly onto the
keypad or display.
Omni 3300
RS232 Port
Omni 3300 Terminal
CR 600
CR 600
Serial Port
O3300 InstallGuide.book Page 20 Thursday, November 25, 1999 3:48 PM