Filter
Top Products
39
TCP/IP
• IP Address — The IP address for MiFi4510L.
• Subnet Mask — The subnet mask network setting for MiFi4510L. The default value
255.255.255.0 is standard for small (class "C") networks. If you change the LAN IP Address,
ensure you use the correct Subnet Mask for the IP address range containing the LAN IP
address.
• MAC Address — The Media Access Controller (MAC) or physical address for MiFi4510L.
• DHCP Address Range — The range of IP addresses reserved for use by MiFi4510L's DHCP
server table. If a device with a static IP address wants to connect to MiFi4510L's network, the
static IP should be outside of the DHCP address range. Most devices do not have a static IP.
Connected Devices
• IP Address — The IP address for the connected device.
• IP Type — This can be DHCP if the IP address came from MiFi4510L, or ARP if the ARP
protocol was used.
• Hostname — The network name for the connected device (if available).
• MAC Address — The MAC address for the connected device.
NOTE The MAC address on the Windows operating system is called the Physical Address.
• Date/Time — The date/time the device was detected by the network.
Buttons
• Refresh — Click this button to re-load the LAN screen to show changes to the list of
connected devices, such as a device that recently joined or left the network.
• Apply — Click this button to apply any changes you made to MiFi4510L's IP address or
subnet mask.
• Revert — Click this button to discard any unsaved changes and keep the most recent IP
address and subnet mask.
IMPORTANT Changing MiFi 4510L's IP address causes the device to re-start. This stops all Wi-Fi
and Internet connections. You must re-connect your computer to MiFi 4510L using the new IP
address.
Be sure to write down the new IP address before you finish changing the profile.