24
DSL Modem User Manual
25
Chapter 4 Configuring Advanced Settings
The “WAN IP Address” screen appears.
WAN IP Address allows manual set up of the IP address of the Modem. To do this:
☞
Note: Some DSL providers use PPPoE to establish communication
with an end user. Other types of broadband Internet connections
may use either DHCP or static IP address. If unsure which connec-
tion is present, check with Verizon before continuing.
1. Select “DHCP” or “PPPoE,” depending on the type of connection the ISP uses.
If PPP Auto Connect is being used, click in the appropriate check box.
2. If PPPoE was selected in step 1, enter the user name and password in the
appropriate text boxes.
3. Select the IP type. If “Single Static IP Address” was selected, enter the IP
address in the “Single Static IP” text box. If “Multiple Static IP Addresses” was
selected, enter the designated gateway IP address and subnet mask address in
the “Gateway Address” and “Subnet Mask” text boxes respectively.