Filter
Top Products
Installation
22 Vidikron Vision Model 120 Owner’s Operating Manual
PRE
L
IMINAR
Y
Other Considerations Other considerations and tips that can help improve your installation:
• Keep the ambient temperature constant and below 35°C (95°F). Keep the projector away
from heating and/or air conditioning vents. Changes in temperature may cause drifts in
the projector circuitry, which may affect performance.
• Keep the projector away from devices that radiate electromagnetic energy such as motors
and transformers. Common sources of these include slide projectors, speakers, power
amplifiers and elevators.
3.4
Installing the Primary
Projection Lens
The projection lens is shipped separately from the projector. To install it, proceed as follows:
1. Using a 2.5-mm hex wrench, loosen the
two hex screws holding the Projector
Front Jewelry in place.
2. Remove the jewelry.
➤