Filter
Top Products
Serial Communications
Vidikron Vision Model 120 Owner’s Operating Manual 69
PRE
L
IMINAR
Y
Image Preset Commands
SISF 0
Loads “ISF Night” image preset
ISF Night
SISF 1
Loads “ISF Day” image preset
ISF Day
SISF 2
Loads “Custom 1” image preset
Custom 1
SISF 3
Loads “Custom 2” image preset
Custom 2
Menu Navigation Commands
The following serial commands are meant to emulate buttons on the remote control or VHD
Controller front panel. Each button has its own serial command, so effectively it is as if you were
using the IR remote only you’ll be doing so via serial commands. These commands provide active
OSD responses just like the IR remote.
ENTR
ENTER (or SELECT) button
(none)
EXIT
EXIT button
MENU
MENU button
MND
Down-Arrow ( ) button
MNL
Left-Arrow ( ) button
MNR
Right-Arrow ( ) button
MNU
Up-Arrow ( ) button
Picture Adjust Commands
The following serial commands are meant to emulate the discrete picture adjustment buttons on
the remote control unit. Use them in conjunction with MNL and/or MNR to make picture
adjustments. For example, to increase Brightness by five increments, send this sequence of
commands:
MBR <Enter>
MNR <Enter>
MNR <Enter>
MNR <Enter>
MNR <Enter>
MNR <Enter>
EXIT <Enter>
MBR
Adjust Brightness
(none)
MCOL
Adjust Color Level
MCON
Adjust Contrast
MTIN
Adjust Tint
Table 6-1. Serial Commands and Responses (continued)
Command Description Response