Filter
Top Products
Installation
Vidikron Vision Model 120 Owner’s Operating Manual 23
PRE
L
IMINAR
Y
3. Remove the Lens Cavity Front Cover.
4. Remove the Rear Lens Cap.
5. Hold the lens assembly with the motor
facing the right side of the Lens Cavity.
Carefully insert the back of the lens
assembly into the hole in the lens flange.
Gently push the lens assembly in until it
is seated flush against the flange and the
motor connectors have seated.
Make sure to route the wire harness in its original position and away
from the moving lens stages and Motor Assembly, to prevent unexpected
disconnection or lens damage.
Caution