ViewSonic PJD6544W Projector User Manual


 
1
Introduction
Projector Features
The projector integrates high-performance optical engine projection and a user - friendly
design to deliver high reliability and ease of use.
The projector offers the following features:
Single chip 0.55" Texas Instruments DLP
®
technology
PJD6345: XGA (1024x768 pixel)
Single chip 0.65" Texas Instruments DLP
®
technology
PJD6544w: WXGA (1280x800 pixel)
Compatibility with Macintosh
®
computers
Compatibility with NTSC, PAL, SECAM and HDTV
D-Sub 15-pin terminal for analog video connectivity
User-friendly, multi-language on-screen display
Advanced electronic keystone correction
RS-232 connector for serial control
HDMI 1.4a support
PJLink
TM
compatible
Support remote control with Crestron software
LAN display 4-1 (maximum 4 PC/ NB / smart phone / smart Pad display to 1
projector)
USB display supports computer connection via USB mini-B type to A type cable
Support USB flash drive for Photo / Video / music playback and office viewer
function
DynamicEco Timer function decreasing the power consumption of the lamp by up to
70% when no input signal can be detected for a set period of time.
Selectable quick power off function
Switchable normal and economic modes to reduce the power consumption
Support 3D DLP link technology
Less then 0.5w power consumption in standby mode.
Note
The information in this manual is subject to change without notices.
The reproduction, transfer or copy of all or any part of this document is not permitted
without express written consent.
The apparent brightness of the projected image will vary depending on the ambient
lighting conditions, selected input signal contrast/brightness settings, and is directly
proportional to projection distance.
The lamp brightness will decline over time and may vary within the lamp manufacturers
specifications. This is normal and expected behavior.