Filter
Top Products
PJL9371ViewSonic
30
IMAGE menu
Item Description
H PHASE
Using the ◄/► cursor buttons adjusts the horizontal phase to
eliminate icker.
Right
ó
Left
• This item can be selected only for a computer signal or a
component video signal.
H SIZE
Using the ◄/► cursor buttons adjusts the horizontal size.
Small
ó
Large
• This item can be selected only for a computer signal.
• When this adjustment is excessive, the picture may not be
displayed correctly. In such a case, please reset the adjustment
by pressing the RESET button on the remote control during this
operation.
• Images might appear degraded when this function is operated, but
it is not a malfunction.
AUTO ADJUST
EXECUTE
Selecting this item performs the automatic adjustment feature.
For a computer signal
The vertical position, the horizontal position and the horizontal
phase will be automatically adjusted.
Make sure that the application window is set to its maximum size
prior to attempting to use this feature. A dark picture may still be
incorrectly adjusted. Use a bright picture when adjusting.
For a video signal and s-video signal
The video format best suited for the respective input signal will be
selected automatically. This function is available only when the
AUTO is selected for the VIDEO FORMAT item in the INPUT menu.
The vertical position and horizontal position will be automatically set
to the default.
For a component video signal
The vertical position, horizontal position and horizontal phase will
be automatically set to the default.
• The automatic adjustment operation requires approx. 10 seconds.
Also please note that it may not function correctly with some input.
• When this function is performed for a video signal, a certain extra
such as a line may appear outside a picture.
• When this function is performed for a computer signal, a black
frame may be displayed on the edge of the screen, depending on
the PC model.
• The items adjusted by this function may vary when the FINE or the
DISABLE is selected for the AUTO ADJUST item of the SERVICE
item in the OPTION menu.