Filter
Top Products
SCANNING 35MM SLIDES AND FILMSTRIPS 19
4. To scan a negative, first slide the filmstrip into the 35mm negative
mask and center the frame you want to scan in the opening.
Then position that mask on the glass and align its square corner
with the arrow on the scanner body. Make sure the text on the mask
faces up.
The 35mm negative mask also has a calibration slot. Do not place
items to be scanned in the calibration slot.
You’re now ready to scan the slide or negative.
To scan a 35mm slide or negative:
1. Start the PaperPort software and click the Twain icon on the
toolbar.
The Visioneer Scan Manager appears.
2. Click the drop-down menu at the top of the Scan Manager and
choose the type of transparency to scan.
Transparency Positive—scan 35mm slide positives
Transparency Negative—scan negatives film or 35mm slide
negatives
Tip: You can also start the Visioneer Scan Manager from the scanner
buttons by setting a button to “Configure Before Scanning.” See
“Selecting New Options for the Buttons” on page 25.