Filter
Top Products
20 VISIONEER ONETOUCH 5820 SCANNER INSTALLATION GUIDE
3. Click Preview to preview the image and, if necessary, adjust the
various settings, then click Scan when the image is what you want.
See “Scanning from the PaperPort Software” on page 34 for details
about scanning, and also see, “Adjusting Scanner Settings” on
page 38 for the steps to adjust the settings.
4. When you are finished scanning, remove the masks from the
scanner glass and store them in the protective bag.
5. Choose Reflective from the Scan Manager’s drop-down menu to
reset for scanning paper items.
Reflective turns off the transparency light in the document cover.
6. If you adjusted the resolution and other settings for scanning slides
or film, reset those settings for scanning paper items.
Click the drop-down arrow
and choose the transparency
scanning option from this
menu,
The option “Reflective” is
for scanning paper items,
not slides or filmstrips.
Tip: Set the resolution to 1200 dpi or higher when scanning your
slides and filmstrips.