Filter
Top Products
STEP 2: CONNECTING THE SCANNER 7
To connect your Visioneer OneTouch 5820 scanner:
1. Check that the TPA cable is plugged into the TPA port on the back
of the scanner.
Your 5820 scanner is shipped with the TPA cable already plugged
into the TPA port, however, if the cable came loose during
shipping, you must plug it into the port securely.
2. Plug the USB cable on the back of your scanner into any USB port
on your computer.
If the plug does not attach easily, make sure that you are plugging it
in correctly. Do not force the plug into the connection.
Note: If you have not installed the software yet, unplug the cable
from the computer and install the software now. When the software
installation is complete a message tells you to connect the scanner.
USB