Filter
Top Products
STEP 3: CONNECT THE SCANNER 13
6. Turn on the power switch.
The status lights come on and flash indicating that the scanner is
receiving power. Your computer recognizes that a scanner has been
plugged into the USB port and automatically loads the appropriate
software to run the scanner.
7. Click the Finish button on the dialog box on the computer screen.
The scanner’s Power and Ready lights are green when the scanner
and computer are communicating properly.
That completes the steps to connect your scanner to the computer.
8. On the Installation screen, click Install ScanSoft PaperPort.
Installation of the PaperPort software begins.