Filter
Top Products
RECALIBRATING YOUR SCANNER 35
3. On the Scanners and Cameras Properties window, make sure the
Strobe XP 200 scanner is selected, and then click Properties.
4. On the Strobe XP 200 Properties window, select the Advanced tab.
5. Click Calibrate on the Strobe XP 200 Properties window.
6. Place the calibration paper in the scanner face up, and then click
OK to start the calibration.
7. When calibration is finished, click OK to acknowledge and close
the completion message.
To recalibrate your scanner for Windows XP:
1. On the Windows taskbar, click Start, point to Settings, and then
click Control Panel.
2. On the Control Panel, click Printers and Other Hardware, and
then click Scanners and Cameras.