Filter
Top Products
CONFIGURING ONETOUCH 39
CONFIGURE BEFORE SCAN
Choosing Configure Before Scan simply opens either the TWAIN or WIA
scanning interface when you press or click the button. You can then use the
interface to change the color mode, resolution, and other settings. When
you scan, the scanned image will still be sent as the File Format and to the
same Destination Application already selected in the OneTouch Properties
window for the button.
TO SET CONFIGURE BEFORE SCAN
1. Open the OneTouch Properties window.
2. Select the Scan Configuration Configure Before Scan.
3. Right-click on Configure Before Scan and choose an interface to use
for configuring before scanning.
TWAIN—The TWAIN Interface opens for you to make changes prior
to scanning. Please see “Scanning from TWAIN” on page 69 for
detailed instructions about scanning with the TWAIN Interface.
WIA—The Windows Image Acquisition (WIA) Interface opens for
you to make changes prior to scanning. Please see “Scanning from
WIA” on page 75 for detailed instructions about scanning with the
WIA Interface.
4. Select the Destination Application and File Format.
Select Configure
Before Scan.
Right-click on
Configure Before Scan
to get the menu, and
choose the
interface to use for
scanning.