Filter
Top Products
84 VISIONEER STROBE XP 450 SCANNER USER’S GUIDE
UNINSTALL YOUR SCANNER
To uninstall the Visioneer Strobe XP 450 scanner, remove the OneTouch
4.0 software, PaperPort, and any other software provided with your
scanner. Follow the steps in the section “Step 2: Install the Software” on
page 8 to reinstall the scanner driver and software.
UNINSTALLING THE SCANNER AND ONETOUCH SOFTWARE
1. On the Windows taskbar, click Start, point to Settings, then click
Control Panel.
2. Windows 2000 and Windows XP: Double-click the Add or Remove
Programs icon.
Windows Vista: Double-click the Programs and Features icon.
3. From the list of programs, select OneTouch 4.0. Click the Change/
Remove button.
4. Click Yes when asked to confirm that you want to remove these
software programs.
5. Follow the same steps to select and remove the Kofax VirtualReScan
module from the installed programs list.
6. The OneTouch 4.0 software and module are now removed from your
computer.
7. Unplug the USB cable from the scanner and turn off the scanner
power.
8. Close all open windows and restart your computer.
UNINSTALLING THE PAPERPORT SOFTWARE
1. On the Windows taskbar, click Start, point to Settings, then click
Control Panel.
2. Windows 2000 and Windows XP: Double-click the Add or Remove
Programs icon.
Windows Vista: Double-click the Programs and Features icon.
3. Select PaperPort and click Remove or Uninstall.
4. A message window opens, asking if you are sure you want to remove
PaperPort from your computer. Click Yes.
5. Close all open windows and restart your computer.