Filter
Top Products
- 23 -
www.vivotek.com
System Configuration
Introduction
The system configuration can be easily done remotely on Internet Explorer through the
Web interface. Administrators may type directly the URL of system configuration,
“http://<IP address of Video Server>/setup/config.html”, to directly enter the
configuration page. If administrators also want to set certain options through the URL,
read the relative section in the Chapter Advanced Usage
for reference. Video Server also
supports FTP to modify the system configuration file, CONFIG.INI, for technical usage.
The details are described in the Chapter Advanced Usage
.
Since it is a networking video server, administrators should well configure “Security”,
“Network” and “Video” at least. To support external serial port devices, configure
“Camera Control” and then “Camera Setting” in “Video”. To utilize the built-in
features of security and web attraction, configure “Application”. Besides these features,
administrators can adjust the system date and time in “System”, or have different
homepage layout by configuring “Homepage layout”. Video Server also provides some
system maintenance like “View log file”, “View parameters” and “Factory default”.