Filter
Top Products
Setting a WatchGuard Security Event Processor log host
78
The log messages may include time synchronizations between the
SOHO and the WatchGuard Key Server, discarded packets for a
packet handling violation, duplicate messages, time-outs for
attempting to open the WatchGuard Feature Key Server, or return
error messages.
Follow these steps to view these log messages:
1 With your Web browser, go to the SOHO System Status page
using the Trusted IP address of the SOHO.
For example, if using the default IP address, go to: http://192.168.111.1.
2 From the navigation bar on the left side, select Logging.
The Logging page appears and the Event Log is displayed in the lower
portion of the page.
Setting a WatchGuard Security Event
Processor log host
Setting a remote log host causes log messages to be transmitted to
a WatchGuard Security Event Processor server (participating in a
WatchGuard Firebox System
TM
solution) preconfigured to accept
logs from your SOHO. It has the advantages of saving local
resources for other less memory-intensive tasks and puts the log
host at the WatchGuard Firebox System site where customer
support can examine logs at your request to troubleshoot security
problems.
1 With your Web browser, go to the SOHO System Status page
using the Trusted IP address of the SOHO.
For example, if using the default IP address, go to: http://192.168.111.1.
2 From the navigation bar on the left side, select Logging =>
WSEP Logging.
The WatchGuard Security Event Processor page appears.