B90-36R305
Bus-Powered USB ADSL Modem
Installation and User Guide
PN 030-300118D 38
Creating a Dial-Up Connection for Macintosh
Use the following procedure to create your DSL dial-up connection on Macintosh computers.
Dial-Up Configuration (Macintosh)
1.
The USB cable should NOT be connected to the computer.
2.
From your desktop, click the Apple menu icon, select the
Control Panels
folder, scroll down and open the
Westell ADSL Setup
folder.
Figure 65
3.
Verify that the Configuration tab shows the VPI/VCI default values below. Do not change these unless
instructed to do so by your service provider.
Modulation:
Multimode
VPI:
0
VCI:
38
Encapsulation Mode:
RFC-2364 Vcmultiplexed PPP
ATM Mode:
PPPoA
4.
Click
OK
and exit the Modem Setup window.
5.
Connect your modem as instructed in the following section.