Westell Technologies B90-36R305 Modem User Manual


 
B90-36R305
Bus-Powered USB ADSL Modem
Installation and User Guide
PN 030-300118D 7
Figure 5
6.
When the
DSL Installer
screen tells you to plug in your modem, use the instructions in the following Hardware
Installation section.
Hardware Installation (Windows 98/Windows ME)
IMPORTANT! Do NOT connect the USB modem to the PC until instructed to do so in
the software driver installation procedure for your operating system.
1.
Insert the flat rectangular end of the USB cable into the USB port on your computer. The figure below shows
the basic cable connections.
POWER
READY
USB CABLE
Figure 6. ADSL Modem Cable Connections
2.
Insert the square end of the USB cable into the USB port of the ADSL modem. The green POWER LED
indicates that it has been plugged in correctly and that the power is
ON
.
3.
Plug a telephone cable into the ADSL/Line connector and into a standard RJ-11 telephone jack.
!