Westell Technologies 6100 Network Router User Manual


 
030-300411 Rev. A 108 July 2004
Westell (Models 6000, 6100, 6110)
User Guide
14.7 LAN Statistics
The following settings will be displayed if you select LAN Stats from the Troubleshooting menu.
Device IP Address Displays the IP address of the devices on the LAN.
DHCP NetMask Displays the Subnet Mask, which determines what portion of an IP address that is
controlled by the network and what portion is controlled by the host.
DHCP Start Address Displays the first IP address that the DHCP server will provide.
DHCP End Address Displays the last IP address that the DHCP server will provide.
DHCP Server Status Displays the status, “ON” or “OFF” of the DHCP Server.
DHCP Server This setting allows the ADSL router to automatically assign IP addresses to local
devices connected to the LAN. Westell advises setting this to enabled for the
private LAN.
OFF=DHCP Server is disabled
Private LAN=DHCP addresses will be saved into the Private LAN configuration.
Public LAN=DHCP addresses will be saved into the Public LAN configuration.
This option is only available if the Public LAN DHCP server is enabled.
NOTE: These addresses will be overwritten if the Internet service provider
supports dynamic setting of these values.
Devices on LAN
IP Address Displays the IP network address that your Router is on.
MAC Address Media Access Controller (MAC) address of this device.
Name Displays the ASCII (text) name of the devices connected to the LAN.
Status Displays the status of the devices connected to the LAN.